International Imaging Seminar 2012
WE WILL DO IT AGAIN THIS TIME! 12/6 (THURSDAY) 15:00-15:50 95% OF VISUAL INSPECTION IS WASTE ? FI METHOD FOR ZERO LEAKAGE & ZERO OVER-DETECTION? OVERVIEW VISUAL INSPECTION IN THE FIELD SHOWS THAT 99% OF THE PRODUCTS ARE GOOD, AND ANOTHER 95% ARE GOOD NO MATTER WHO SEES THEM. THE INSPECTION EQUIPMENT CAN BE USED TO ELIMINATE THIS 95% [...].
I got the actual product.
I received a copy of "Introduction to Image Processing for Machine Vision and Image Inspection" from the publisher. When I read it again, I found it "interesting," I said to myself. If I were to read it again, I would say to myself, "This is interesting. I guess so. This book has been used in a variety of mail [...].
Introduction to Image Processing for Machine Vision and Image Inspection
A book for which I had the honor of writing a few pages has recently been published. It is called "Preface. The above page describes most of the contents of the book, but what I wrote is quite different as an "introduction to image processing". Perhaps it is an unconventional approach [...].
Sharing Goals
What we think when we visit our clients. The most important thing is to achieve simplicity that can be used in the field. And to be able to offer it at a price that is commensurate with the return on investment. And... to share goals with the field. In order to really achieve results, we need to have a lot of know-how [...].
Inspection of plain PCB
Object: Inspection of plain PCB about 300mm square Inspection with 2.0 megapixel GigE camera at 25fps + 2x optical lens = 2.2?/pixel Lighting: oblique illumination (xenon strobe) Acquisition & inspection speed: 24 times/sec = head shot at camera frame rate [...].
color camera
We received a request from a nearby user to inspect gold plating on SUS with a 10 mm field of view. This is a level of inspection that is difficult to see even with a microscope unless you are used to it. We started with a "monochrome camera + blue lighting" and after about 2 months of trial and error, we were able to [...].
completion of a manuscript
I was asked by an imaging journal to write a manuscript on the topic of "Manufacturing Sites and Image Processing," and today I finally finished the manuscript. Basically, it is in line with the content of this blog. But I also had the thought, "Are you really going to put this in print?" I also have a thought. When the release date is decided [...].
We don't want to sell a lot of...
We want to work together with the field to create interesting inspection equipment. That is why we do not easily go overseas in search of volume. I think we will only do so when we feel that we have "done it all" in Japan. But that's still a long way off.
Study Session, Nagoya, Japan
The first study session was held in Nagoya on the 21st and 22nd. Thank you to all those who took time out of their busy schedules to attend. We were a bit nervous about how the workshop would turn out, as there have been few examples of this style of workshop in the past, but the participants [...]...
Study Session" Afterwards
We have received an unexpectedly large number of applications for the study sessions that we have been sending out since the last announcement, and we will be closing them after 5 sessions on May 21,22 in Nagoya, May 29,30 in Osaka, and June 7 in Tokyo. We will also be holding a "Participation" workshop for 10 people [...].