Noise Suppression 1
The software may suddenly shut down, the camera may shut down at an unbelievable timing, or the operation may become unstable. This may be due to electrical noise (extra signals). For example, if the workpiece is large [...].
Combination with multi-axis robot
We are currently developing a device called "FlexInspector-ROBO" that combines our FIS-100 automatic visual sensor and NACHI's MZ07 robot. It is already working well, but what I see when I look at it is that it is an automatic visual inspection [...].
Inspection of three-dimensional objects
We are currently working on a project that requires 1) 7 cameras to capture images from multiple directions, 2) each camera has 3~4 different lighting conditions to be switched, 3) as a result, more than 20 imaging inspections, and 4) 1.3 megapixel cameras at 30 fps. This is a fairly large [...].
Inspection of plain PCB
Object: Inspection of plain PCB about 300mm square Inspection with 2.0 megapixel GigE camera at 25fps + 2x optical lens = 2.2?/pixel Lighting: oblique illumination (xenon strobe) Acquisition & inspection speed: 24 times/sec = head shot at camera frame rate [...].
color camera
We received a request from a nearby user to inspect gold plating on SUS with a 10 mm field of view. This is a level of inspection that is difficult to see even with a microscope unless you are used to it. We started with a "monochrome camera + blue lighting" and after about 2 months of trial and error, we were able to [...].
8-MEGAPIXEL CAMERA JAI AM-800GE
As I may have mentioned before, the use of a 5-megapixel camera does not allow the optical resolution of the lens to keep up with the smaller cell size. Therefore, our stance that 5-megapixel cameras are not recommended has not changed much. [...].
Image Control
In order to fully utilize the camera's capabilities, the image controller should even handle the workpiece in the imaging section. Only by doing so, it is possible to capture and inspect images at more than 20 frames per second, which is close to the limit of the camera's performance. The normal inspection su [...].
Easier.
CURRENTLY, THE NEW FIS-100 IS BEING ENHANCED BASED ON THE OPINIONS OF USERS WHO HAVE CONSIDERED IT. ONE OF THE REQUESTS WE RECEIVED WAS TO IMAGE THREE-DIMENSIONAL OBJECTS FROM VARIOUS DIRECTIONS AND INSPECT THEM AS "THE SAME AS GOOD PRODUCTS NO MATTER WHERE THEY ARE VIEWED. THE FIS-100 IS CAPABLE OF CAPTURING IMAGES FROM UP TO 20 [...].
Modification of existing inspection equipment
Recently, we have received several projects to modify existing inspection equipment. We are now remodeling equipment that was scheduled to be scrapped into a full-scale visual inspection system. Many of the existing inspection equipment often uses stages that are more precise than necessary, and there is still a lot of [...]...
AUTOMATIC APPEARANCE SENSOR FIS-100
Just before the International Technical Exhibition on Image Technology and Equipment, the "automatic appearance sensor" that I have wanted to do for some time is taking shape. Compared to FlexInspector, which is said to be easy, its ease of use is overwhelming. It will be one of the answers to realize "anyone can use" [...].